Table of Contents
Advertisement
11
Troubleshooting guide
Frequent water cooling
cycles
Machine is foaming
excessively
36
Frequent water cooling
cycles
4:25
Degritter machine is using 300W
of power for its ultrasonic clean-
ing. Most of this will be eventually
converted to heat that will slowly
raise the water temperature in the
ultrasonic cleaning tank. Once the
water temperature reaches 35 °C
or 95 °F, the machine will insert a
3 min water cooling cycle into the
washing program. This is done to
prevent damage to the record from
too high temperatures.
It is normal for the machine to reach
the water temperature threshold
after 1-2 washing cycles with 4 rev-
olutions.
In order to reduce water cooling
cycles:
•
Fill the removable water tank
with as much water as you feel
safe carrying. The more the
better.
•
Set a longer drying cycle with
a lower Fan Power setting. This
will give water more time to
cool between washing cycles.
•
When operating the machine
remove the lid from the water
tank.
Advertisement
Table of Contents
