Table of Contents
Advertisement
04
Getting started
01
SELECT PROPER
AC VOLTAGE
02
PLACE ON LEVEL SURFACE
03
TURN DEGRITTER ON
04
PUT WATER INTO THE TANK
05
INSERT THE RECORD
INTO THE MACHINE
06
PRESS START
14
01
SELECT PROPER AC VOLTAGE
Make sure the slide switch is in the
position indicating your wall output
voltage, either 230 V or 115 V. Use the
tip of a pen to slide the switch.
WARNING: An incorrect AC setting
will damage the product and is not
covered by the product warranty.
02
PLACE ON LEVEL SURFACE
Degritter must be placed on a level
surface for it to function properly.
03
TURN DEGRITTER ON
Plug one end of the power cable
into the machine and the other end
into your wall outlet. Turn on the
machine from the AC switch at the
back.
Advertisement
Table of Contents
