Table of Contents
Advertisement
11
Troubleshooting guide
MACHINE MAINTENANCE
Water droplets on record
after drying
40
MACHINE MAINTENANCE
After every 50 washing programs,
the machine will automatically run
a quick maintenance cycle and
will then continue with the selected
program.
The maintenance cycle will pump
water back and forth through the
valves in order to clean potential
debris from them. The cycle will take
under 1 minute.
The maintenance program is run
every 50 cycles with an offset of 10.
This means that the program will
start on the 60th, 110th, 160th, 210th
cycles and so on.
Machine maintenance cycle can be
started manually. To do so, navigate
to the Degas program in the menu.
Press and hold the left button and
immediately press the right button.
Advertisement
Table of Contents
