Table of Contents
Advertisement
7.
Connect the backplane cables.
8.
Install the drives.
9.
Install the access panel.
10. Return the server to the rack.
11. Connect each power cord to the server.
12. Connect each power cord to the power source.
13. Power up the server.
The installation is complete.
Installing primary and secondary risers
Prerequisites
Before you perform this procedure, make sure that you have the following items available:
•
The components included with the hardware option kit
•
T-10 Torx screwdriver
Procedure
1.
Power down the server.
Do one of the following:
2.
•
Disconnect each power cord from the power source.
•
Disconnect each power cord from the server.
Do one of the following:
3.
Installing primary and secondary risers
128
Advertisement
Table of Contents
