Table of Contents
Advertisement
CAUTION: Avoid tight bend radii to prevent damaging the internal wires of a power cord or a
server cable. Never bend power cords and server cables tight enough to cause a crease in the
sheathing.
b. Secure the power cord with the strain relief strap. Roll the extra length of the strap around the power
supply handle.
6. Connect the power cords:
a. Connect each power cord to the server.
b. Connect each power cord to the power source.
7. Make sure that the power supply LED is green.
8. If installed, close the cable management arm.
The installation is complete.
Hardware options installation
95
Advertisement
Table of Contents
