6. Do one of the following:
For Type-a smart array controllers, install the controller in the smart array modular controller
•
connector.
For Type-p smart array controllers, install the controller in a compatible expansion slot.
•
7. Cable the controller.
The installation is complete.
Riser and riser cage options
Installing primary and secondary risers
Prerequisites
Before you perform this procedure, make sure that you have the following items available:
• The components included with the hardware option kit
• T-10 Torx screwdriver
Procedure
Power down the server.
1.
2.
Do one of the following:
Disconnect each power cord from the power source.
•
Disconnect each power cord from the server.
•
3.
Do one of the following:
Extend the server from the rack.
•
Remove the server from the rack.
•
Hitachi Advanced Server HA820 G2 User Guide
88