Table of Contents
Advertisement
Advanced operation
3.
Enter the KVM Switch submenu.
4.
Select Enabled/Disabled as desired and confirm.
When enabling the KVM switch, the Image Source Selection menu will be inaccessible. In addition,
Hibernate will be disabled to guarantee correct USB port switching also when one or both
workstations are in sleep mode.
To switch KVM inputs
1.
Bring up the OSD main menu.
2.
Navigate to the Configuration > Image Sources menu.
3.
Enter the KVM Input Selection submenu.
4.
Select the desired KVM input and confirm.
When switching KVM inputs, the video is switched instantly while switching the USB signal might
take a little longer (up to 2 seconds).
KVM input switching can also be done more quickly via the shortcut bar. See
page
24.
4.22 Grayscale conversion modes
Your Nio Fusion 12MP automatically detects the connected video input signals and applies the
correct grayscale conversion settings. Manually selecting a grayscale conversion mode is possible,
but then your display's image source selection mode should be set to allow this. Refer to
source selection", page 37
About grayscale conversion modes
Grayscale conversion modes specify how color generated on the display controller is converted to grayscale
in your display.
The available grayscale conversion modes are:
•
No conversion
•
Use Red Channel: This mode is intended for grayscale displays where gray is sent over the red channel.
•
Use Green Channel: This mode is intended for grayscale displays where gray is sent over the green
channel.
•
Use Blue Channel: This mode is intended for grayscale displays where gray is sent over the blue channel.
To manually select a grayscale conversion mode:
1.
Bring up the OSD main menu.
2.
Navigate to the Configuration > Image Sources > Input Settings > DisplayPort 1/2 menu.
3.
Enter the Grayscale Conversion submenu.
4.
Select one of the available color conversion modes and confirm.
4.23 DisplayPort standard version
About DisplayPort standard version
The Nio Fusion 12MP supports 2 DisplayPort standard versions: DP V1.1 and DP V1.2, the latter providing a
higher video bandwidth.
38
R5913350 /05
Nio Fusion 12MP
to do this.
"KVM input switching",
"Image
Advertisement
Table of Contents
