Panasonic PT-REZ12 Operating Instructions Manual page 275

Class Command
Input terminal name
2 INNM ?
query
Input signal resolution
2 IRES ?
query
Recommended
2 RRES ?
resolution query
FREZ Freeze control
2
FREZ ? Freeze status query
Cooling notification
2 POWR
Warmup notification
2 ERST Error notification
2 LKUP Link up notification
Input switch
2 INPT
completion notification
2 SRCH Projector search
*1 When the optional 12G-SDI Terminal Board (Model No.: TY-SB01QS) is installed in <SLOT>
*2 When the optional Function Board for 12G-SDI Optical (Model No.: TY-SB01FB) is installed in <SLOT>
*3 When the optional DIGITAL LINK Terminal Board (Model No.: TY-SB01DL) is installed in <SLOT>
*4 When the optional Wireless Presentation System Receiver Board (Model No.: TY-SB01WP) is installed in <SLOT>
*5 When the Function Board by other manufacturers is installed in <SLOT>
PJLink security authentication
A PJLink password for security authentication procedure is required for communication of the PJLink command.
The PJLink password can be set in the [NETWORK] menu → [PJLink] → [PJLink PASSWORD] (x page 211), or
in "[Set up password] page (when accessed by administrator account)" (x page 250) of the web control screen.
When communicating the PJLink command without authentication procedure, set the PJLink password as blank.
The factory default setting of the PJLink password is blank.
f For specifications related to PJLink, visit the following website of Japan Business Machine and Information
System Industries Association.
https://pjlink.jbmia.or.jp/
Chapter 7 Appendix — Technical information
Parameter/response
Control details
string
31 / HDMI1
32 / HDMI2
33 / DISPLAYPORT
34 / SDI[SLOT]
34 / SDI OPT1 [SLOT]
34 / DIGITAL
LINK[SLOT]
34 / PressIT[SLOT]
34 / SLOT
35 / SDI OPT2 [SLOT]
AAAAxBBBB
1920x1200
0
1
0
1
xxxxxx
xx:xx:xx:xx:xx:xx
31
32
33
34
35
ACKN=xx:xx:xx:xx:xx:xx
Remark
Input name of the optional 12G-SDI Terminal Board (Model No.:
TY-SB01QS) installed in <SLOT>
Input name of the optional Function Board for 12G-SDI Optical
(Model No.: TY-SB01FB) installed in <SLOT>
Input name of the optional DIGITAL LINK Terminal Board (Model
No.: TY-SB01DL) installed in <SLOT>
Input name of the optional Wireless Presentation System
Receiver Board (Model No.: TY-SB01WP) installed in <SLOT>
Input name of the Function Board by other manufacturers
installed in <SLOT>
Input name of the optional Function Board for 12G-SDI Optical
(Model No.: TY-SB01FB) installed in <SLOT>
AAAA: Horizontal resolution
BBBB: Vertical resolution
Returns display resolution.
Freeze clear
Freeze (stop)
Notifies when the power is turned off.
Notifies when the power is turned on.
Notifies when an error occurs.
Notifies the MAC address when the PJLink communication
becomes possible.
HDMI1
HDMI2
DisplayPort
SDI /SDI OPT1 /DIGITAL LINK
*1 *2
SDI OPT2
*2
The projector connected to the same network that can
communicate with PJLink will respond with its MAC address.
/PressIT /SLOT
*3 *4 *5
ENGLISH - 275