Table of Contents
Advertisement
Deleting the registered user test pattern
1)
Click [Projector control] → [Detail control] → [TEST PATTERN].
f The test pattern selection buttons are displayed at the right side of the control page and [USER TEST
PATTERN LIST] is displayed on the bottom right.
f Number that user test pattern is registered is displayed as the user test pattern name, and the [EDIT] button
is displayed.
2)
Click the [EDIT] button of the user test pattern number to be deleted.
f The edit screen is displayed at the lower part of the [USER TEST PATTERN LIST].
3)
Click the [DELETE] button in the edit screen.
f The confirmation screen is displayed.
4)
Click [OK].
f Deleting of the user test pattern is completed.
Note
f The edit screen can be displayed by clicking [USER1], [USER2], or [USER3] registered with test pattern in the test pattern selection buttons
displayed on the right side of the control page.
Changing the name of the user test pattern
1)
Click [Projector control] → [Detail control] → [TEST PATTERN].
f The test pattern selection buttons are displayed at the right side of the control page and [USER TEST
PATTERN LIST] is displayed on the bottom right.
f Number that user test pattern is registered is displayed as the user test pattern name, and the [EDIT] button
is displayed.
2)
Click the [EDIT] button of the user test pattern number to change the name.
f The edit screen is displayed at the lower part of the [USER TEST PATTERN LIST].
3)
Enter the new name in the text box of the edit screen.
f Up to 16 single-byte alphanumeric characters can be entered.
4)
After entering of the name is completed, click [RENAME].
f Changing of the name is completed, and the name will be reflected in [USER TEST PATTERN LIST].
232 - ENGLISH
Chapter 5 Operations — Using the web control function
Advertisement
Table of Contents
