Table of Contents
Advertisement
Changing the color of the cross hatch test pattern
1)
Select the [TEST PATTERN] menu, and press the <ENTER> button.
f The [TEST PATTERN] screen (list format) is displayed.
2)
Press as to select [CROSS HATCH], and press the <ENTER> button.
f The cross hatch test pattern and the [TEST PATTERN] screen (toggle selection format) are displayed.
3)
Press the <ENTER> button again.
f The [TEST PATTERN COLOR] screen is displayed.
4)
Press as to select a color, and press the <ENTER> button.
f The color of the cross hatch test pattern is changed to the selected color.
Note
f The [TEST PATTERN COLOR] setting returns to [WHITE] when the projector is turned off and goes into standby mode.
f Colors of the test patterns other than cross hatch test patterns cannot be changed.
Registering the test pattern
1)
Save the file for the test pattern to register in the projector into a USB memory.
2)
Insert the USB memory into the <USB> terminal.
3)
Select the [TEST PATTERN] menu, and press the <ENTER> button.
f The [TEST PATTERN] screen (list format) is displayed.
4)
Press as to select [USER TEST PATTERN 1], [USER TEST PATTERN 2], or [USER TEST PATTERN 3],
and press the <ENTER> button.
f The test pattern and the [TEST PATTERN] screen (toggle selection format) are displayed.
f If the test pattern is not registered, the all black screen is displayed.
f If the test pattern is already registered, that test pattern is displayed.
5)
Press the <ENTER> button again.
f The [USER TEST PATTERN] screen is displayed.
6)
Press as to select [SAVE USER TEST PATTERN], and press the <ENTER> button.
f The [SAVE USER TEST PATTERN] screen is displayed.
f Proceed to Step 8) if the file for test pattern to register is saved in the root directory of the USB memory.
7)
Press as to select the folder in which the file is saved, and press the <ENTER> button.
f Repeat the folder selection operation until the file for the test pattern to register is displayed.
8)
Press as to select the file, and press the <ENTER> button.
f The confirmation screen is displayed.
9)
Press qw to select [OK], and press the <ENTER> button.
Note
f For the procedure to register the user test pattern from the web control screen, refer to "Registering the user test pattern" (x page 231).
f For the USB memory that can be used with the projector and handling of the memory, refer to "Using the USB memory" (x page 86).
f When the projector is initialized by one of the following methods, the data registered in [USER TEST PATTERN 1], [USER TEST PATTERN
2], and [USER TEST PATTERN 3] are initialized.
g When initialized by selecting the [PROJECTOR SETUP] menu → [INITIALIZE] → [FACTORY RESET]
g When initialized by setting the [PROJECTOR SETUP] menu → [INITIALIZE] → [USER SETTINGS] → [OTHER USER SETTING] to
[INITIALIZE]
f The test pattern that can be registered in the projector is a still image data fulfilling following conditions.
g PNG format or BMP format file with resolution of 1 920 x 1 200 dots or less.
g For PNG format: 1/8/16/24/32/48/64 bits (however, α blending becomes invalid and the background image will not be transparent.)
g For BMP format: 1/8/24 bits
Chapter 4 Settings — [TEST PATTERN] menu
ENGLISH - 193
Advertisement
Table of Contents
