Table of Contents
Advertisement
r Status display icon
[POWER]
[SHUTTER]
[OSD]
[GEOMETRY]
[LIGHT SOURCE]
[ERROR]
226 - ENGLISH
Chapter 5 Operations — Using the web control function
The power is switched off. (Standby status)
In the projection mode
The shutter function is enabled (shutter: closed).
The shutter function is disabled (shutter: opened).
The on-screen display is set to on (display).
The on-screen display is set to off (hide).
The [POSITION] menu → [GEOMETRY] is set to [OFF].
The [POSITION] menu → [GEOMETRY] is set to [KEYSTONE].
The [POSITION] menu → [GEOMETRY] is set to [CORNER
CORRECTION].
The [POSITION] menu → [GEOMETRY] is set to [CURVED
CORRECTION].
The [POSITION] menu → [GEOMETRY] is set to [PC-1].
The [POSITION] menu → [GEOMETRY] is set to [PC-2].
The [POSITION] menu → [GEOMETRY] is set to [PC-3].
Corresponding light source is illuminated.
Corresponding light source is not illuminated.
The light source is in warning status.
The light source is in error status.
The temperature is in warning status.
The temperature is in error status.
A warning other than light source or temperature has occurred.
An error other than light source or temperature has occurred.
Advertisement
Table of Contents
