Table of Contents
Advertisement
9)
Click [Next].
f The update confirmation screen is displayed.
10) Click [Start].
f Update is started.
f The light source indicator <LIGHT1> and the light source indicator <LIGHT2> on the projector blink red
alternately while updating.
f Elapsed time and rough progress can be confirmed in the update status display screen. The required time
is approximately 20 minutes.
11) Confirm the completion of the update.
f Once the update is completed, the completion confirmation screen is displayed.
f To continue to update the firmware of another projector, click [Yes]. The connection setting screen in Step
7) is displayed.
f To end the update tool, click [No].
12) Confirm the firmware version.
f Turn on the power of the projector and confirm the firmware version in the [STATUS] screen.
Attention
f Do not turn off the main power of the projector or disconnect the LAN cable while updating.
Chapter 5 Operations — Updating the firmware
ENGLISH - 263
Advertisement
Table of Contents
