Champion 100515 Installation Manual page 41

Wi-fi
HOME STANDBY GENERATOR- ALL aXis CONTROLLER
On
Internet may not be available.
If you want to connect this network without
internet access, you can connect only this
time or you can set your phone to always
connect to it even if internet isn't available.
You can change this in Settings >
Connections > Wi-fi > ADVANCED >
Switch to mobile data > Network
exceptions
3. After connecting Wi-Fi, open your device's web browser. In
the browser address change the address to 192.168.0.90 and
begin search. This will direct your browser to the Champion
aXis Controller Home Standby Generator Settings page
®
located on the ATS. If your device's web browser does not
load the Champion aXis Controller
Settings Page but rather stays connected to the internet, turn
off mobile data on the device (if applicable) and make sure
the device is not connected to any other networks.
192.168.0.90
MODELS
®
Connect only this time
Allow switch
Stay connected
Home Standby Generator
®
4. On the Champion aXis Controller
Settings Page, set the date and time. Use either the dropdown
boxes or the "USE THIS DEVICE DATE & TIME" button to set
Generator Date and Time
the time and date.
USE DEVICE DATE & TIME
Date:
Time:
Home Standby
Generator Settings
5. Confirm and apply the settings before continuing. If you do
not apply immediately, the clock will be later than actual.
Unsaved changes are highlighted.
Generator Date and Time
Date
Time
Day Light Saving
Generator Exercise
(Automated Maintenance Running)
Frequency:
Day:
Time:
EDIT EXERCISE FREQUENCY
41
INSTALLATION
Home Standby Generator
®
Choose Month...
Choose Date...
Choose Year...
Choose Hour...
Choose Minute...
Choose AM/PM...
CONFIRM DATE & TIME
March 22, 2022
Unsaved Changes
08:40 AM
Unsaved Changes
On
Unsaved Changes
EDIT DATE & TIME
Every Week
Friday
09:00 AM
APPLY REVERT