Menus; Status Menu; Quick Menu; Start-Up Wizard For Open Loop Applications - Trane TR150 Programming Manual

How to Program

2.3 Menus

2 2

2.3.1 Status Menu

In the Status menu the selection options are:
•
Motor Frequency (Hz), 16-13 Frequency
•
Motor Current (A), 16-14 Motor current
•
Motor Speed Reference in Percentage (%),
16-02 Reference [%]
•
Feedback, 16-52 Feedback[Unit]
•
Motor Power (kW) (if 0-03 Regional Settings is set
to [1] North America, Motor Power is shown in the
unit of hp instead of kW), 16-10 Power [kW] for
kW, 16-11 Power [hp] for hp
•
Custom Readout 16-09 Custom Readout

2.3.2 Quick Menu

Use the Quick Menu to programme the most common
functions. The Quick Menu consists of:
•
Wizard for open loop applications
•
Closed loop set-up wizard
•
Motor set-up
•
Changes made
10
TR150 Programming Guide
2.3.3 Start-up Wizard for Open Loop
Applications
The built-in wizard menu guides the installer through the
set up of the frequency converter to an open loop
application. An open loop application is here an
application with a start signal, analog reference (voltage or
current) and optionally also relay signals (but no feed back
signal from the process applied).
Illustration 2.2 Set-up of the Frequency Converter
The wizard is initially shown after power up until any
parameter has been changed. The wizard can always be
accessed again through the Quick Menu. Press [OK] to start
the wizard. If [Back] is pressed, the frequency converter
returns to the status screen.
Illustration 2.3 Wizard
BAS-SVP16A-EN - Rev. 2013-09-05