Figure 1-1: Acs Rotary Stage With Callouts; Table 1-3: Acs200 Model Numbering System - Aerotech ACS Hardware Manual

ACS Hardware Manual
Table 1-3: ACS200 Model Numbering System
ACS Mechanical-Bearing Direct-Drive Rotary Collet Stage, 200 mm diameter
Stage Size (Required)
-155
-185
Chuck Style (Required)
-3J1
-3J2
-3J3
-3J4
-3J5
-3J6
-3J7
-3J8
Feedback (Required)
-E1
-E2
-E3
-E4
-E5
NOTE: Digital output encoder signals are synthesized with a 16 MHz clock. Ensure that the encoder sample rate on the controller is
at least 16 MHz or higher (slower clock rates are available on request).
Metrology (Required)
-PL1
-PL2
Accessories (To be Ordered as a Separate Line Item)
CGF
www.aerotech.com
155 mm stage height; 11.1 N·m continuous torque
185 mm stage height; 15.9 N·m continuous torque
3-Jaw gripper with 12 mm clear aperture, 10 mm stroke, normally closed
3-Jaw gripper with 12 mm clear aperture, 10 mm stroke, normally open
3-Jaw gripper with 12 mm clear aperture, 16 mm stroke, normally closed
3-Jaw gripper with 12 mm clear aperture, 16 mm stroke, normally open
3-Jaw gripper with 25 mm clear aperture, 13 mm stroke, normally closed
3-Jaw gripper with 25 mm clear aperture, 13 mm stroke, normally open
3-Jaw gripper with 25 mm clear aperture, 20 mm stroke, normally closed
3-Jaw gripper with 25 mm clear aperture, 20 mm stroke, normally open
Incremental encoder, 1 Vpp, sine wave output
Incremental encoder, TTL, x5 interpolation
Incremental encoder, TTL, x10 interpolation
Incremental encoder, TTL, x25 interpolation
Incremental encoder, TTL, x50 interpolation
Metrology, uncalibrated with performance plots
Metrology, calibrated (HALAR) with performance plots
Collet and gripper filtration kit
Figure 1-1: ACS Rotary Stage with Callouts
Chapter 1
Overview
11