Information Codes - Dacor DOB30M977D Series User Manual

Troubleshooting

Information codes

Oven
Displayed
Code
C-d0
C-d1
C-F0
C-F2
C-20
C-21
C-23
C-30
C-31
88 English
Possible cause
This code occurs if the control key is
short for 1 minute.
This code occurs if the door lock is
mispositioned.
This code occurs if communication
between the Main and Sub PBA is
interrupted.
This code occurs if communication
between the Main and Touch is
interrupted.
The oven sensor is open when the
oven is operating.
The oven sensor is short when the
oven is operating.
This code occurs if the internal
temperature rises abnormally high.
The temp probe sensor is short
when the oven is operating.
The PCB sensor is open when the
oven is operating.
The PCB sensor is short when the
oven is operating.
This code occurs if the PCB
temperature rises abnormally high.
Solution
Clean the buttons and make sure
there is no water on/around
them. Turn off the oven and try
again. If the problem continues,
contact a local Dacor Customer
Service.
Press OFF, and then restart the
oven. If the problem persists,
disconnect all power to the oven
for at least 30 seconds and then
reconnect the power. If this does
not solve the problem, call for
service.
Press OFF, and then restart the
oven. If the problem persists,
disconnect all power to the oven
for at least 30 seconds and then
reconnect the power. If this does
not solve the problem, call for
service.
Call for service