Dacor DOB30M977D Series User Manual page 73

Oven racks
• If the racks are left in the oven during a self-cleaning cycle, their color will turn slightly
blue and the finish will be dull. After the self-cleaning cycle is complete and the oven
has cooled, rub the sides of the racks with wax paper or a cloth containing a small
amount of oil. This will help the racks glide more easily on their tracks.
• Gliding racks may be cleaned by hand with an abrasive cleaner or steel wool. During
cleaning, be careful not to allow water or cleaner to enter the slides on the sides of
rack.
NOTE
• Do not clean in a dishwasher.
• If the rack becomes hard to remove or replace, lightly wipe the oven rack guides with
cooking oil. Do not wipe cooking oil on the slides.
• If the rack becomes difficult to slide, the rack may need to be lubricated using a
graphite lubricant.
NOTE
To order graphite lubricant., call Dacor Customer Service at 833-353-5483 or visit our
homepage (http://www.dacor.com/Customer-Care/Service-Parts) and search for part
number DG81-01629A.
To lubricate the slides of the gliding rack
1. Remove the rack from the oven. See
removing the gliding rack in the Using
the gliding rack section on page 35.
2. Fully extend the rack on a table or
countertop. Newspaper may be placed
underneath the rack for easy cleanup.
3. If there is debris in the slide tracks,
wipe it away using a paper towel. (Any
graphite lubricant wiped away must be
replaced - See steps 4 through 7.)
English 73