Troubleshooting - EUROCOM M590KE EMPEROR-X User Manual

Concise User's Guide

Troubleshooting

Problem
The DVD regional
codes can no longer be
changed.
The TouchPad doesn't
work.
The Wireless LAN/Blue-
tooth/PC Camera mod-
ules cannot be detected.
The Wireless LAN/Blue-
tooth/PC Camera mod-
ules cannot be
configured.
The PC Camera software
displays a black screen
when the EMAMCAP
software is run.
38 - Troubleshooting
The code has been changed the maximum 5 times. See
page 14.
The TouchPad has been disabled. Press the TouchPad toggle (Fn + F1) key combination (make
sure you have installed the TouchPad driver).
The modules are off. Check the appropriate LED indicator
on or off (see "LED Indicators" on page
ate AP-Key button/function key combination in order to enable the module (see pages
12).
The driver(s) for the module(s) have not been installed. Make sure you have installed the driver
for the appropriate module (see the instructions in
page 25 for the appropriate module).
The software is using the incorrect device. If you have both the optional PC Camera and TV
Tuner modules present, go to the Devices menu in the EMAMCAP program and select the
USB2.0 1.3M PC CAM device (see page 30).
Possible Cause - Solution
"Changing DVD Regional Codes" on
10). If the LED indicator is off, then press the appropri-
"WinXP Driver Installation Procedure" on
to see if the modules are
11 and