EUROCOM M590KE EMPEROR-X User Manual page 42

Concise User's Guide
25. Insert the RAID Driver Diskette into the external USB Floppy drive and press Enter.
26. Select "NVIDIA RAID CLASS DRIVER (required)" and press Enter to select it.
27. The system will now read from the floppy disk drive and then return to the Windows Setup menu.
28. When the Windows Setup menu appears, press the <S> key a second time to "Specify Additional Device".
29. Press Enter, and use the arrow keys to select the "NVIDIA nForce Storage Controller (required)" and press Enter again.
30. Press Enter to continue installing the operating system (the screen should show both drivers as per
normal (see your Windows documentation if you need help on installing the Windows OS).
31. Install the chipset driver as per the instructions in
36 - RAID Configuration
NVIDIA RAID CLASS DRIVER (required)
NVIDIA nForce Storage Controller (required)
Figure 18 - RAID Driver Select 1
NVIDIA RAID CLASS DRIVER (required)
NVIDIA nForce Storage Controller (required)
Figure 19 - RAID Driver Select 2
Windows Setup
Setup will load support for the following mass storage device(s):
NVIDIA RAID CLASS DRIVER (required)
NVIDIA nForce Storage Controller (required)
Figure 20 - Windows Setup Both Drivers Selected
"Chipset" on page 25.
Figure 20 below) as