Table of Contents
Advertisement
Start a Recording
To start a recording, do one of the following:
In the PEL Control Panel, Select the appropriate option in the Recording
■
tab of the Configuration dialogue box.
The device can be configured to trigger a recording either at a future date
and time, or immediately after completing the device configuration.
■
On the device, Press the Select key. The device will display START.
Confirm with the
To stop a recording, do one of the following:
In the PEL Control Panel, select Device > Stop recording
■
On the device, press the Select / Control key. The device will display
■
STOP. Confirm with the
Viewing the Recording
Recorded data can be transferred to the PC in two ways for viewing and
generating reports:
■
The SD card can be removed from the device and connected to the PC
using the supplied SD card reader.
Start the PEL Control Panel, select the Open command in the File menu,
ƒ
point to the ICP file with the desired session number on the SD card, and
select Open.
■
The recorded data can be transferred via a direct link between the PC
and the PEL (Wi-Fi). Start the PEL Control Panel, open a connection to
the device, select the device in the navigation tree (make sure Wi-Fi is
enabled), and then select Recorded Sessions. Double-click the desired
recording session. Once the download has finished, select the downloaded
test, and click Open in the Download dialogue box.
In both cases, the session is added to My Open Sessions in the navigation tree.
Then, the data can be displayed.
User Manual
The user manual is included on the provided USB stick along with the DataView
software. It is also available on our website at www.aemc.com.
Power & Energy Logger Model PEL 52 - Quick Start Guide
key. The
symbol will blink.
key. The
symbol will disappear.
.
®
11
Advertisement
Table of Contents
