Quick Start Guide - u-blox XPLR-AOA-3 User Manual

1

Quick start guide

Install s-center evaluation software
s-center is a powerful and easy-to-use tool for evaluating, configuring, and testing u-blox short range
modules. Running on Windows 10 operating systems, the software allows end users to configure and
assess the performance of u-blox short range modules.
Use the following procedure to download and install the s-center software and documentation. The
software can be downloaded from the u-blox
1. Download the latest s-center software to your computer.
2. Open the s-center setup installer to install the software.
3. Select Launch button in the installer or open the application from the Windows Start button.
Install the serial port drivers
EVB-ANT-1 includes a mounted FTDI chip that provides the serial port connectivity. The driver for the
UART is normally installed automatically when the board is connected to the PC. If the driver does not
start automatically, the driver files can be retrieved from the manufacturer's web site at
https://ftdichip.com/.
Connect the ANT-B10 board
Connect the ANT-B10 board to the EVB-ANT-1 board. Physically align the boards and gently plug the
20-pin, male and female header connectors together. See also
Install u-connectLocate software on the ANT-B10
u-connectLocate is continuously improved with performance and quality enhancements and it is
strongly recommended to always use the latest available version of the u-connectLocate software.
See also Flashing using
Install host software on the EVB-ANT-1
See EVB-ANT-1 .
Install tag software
See C209 Software and
Test the system
See ANT-B10 configuration and testing
ANT-B10 connected directly to the PC, or
anchor events to a positioning engine over an ethernet or Wi-Fi network.
UBX-22006906 - R07
C1-Public
s-center
s-center.
flashing.
for a description of setup and running of the system with the
EVB-ANT-1 software
Quick start guide
XPLR-AOA-3 - User guide
product page and is available free of charge.
Assembling the
for a description on how to send the
kit.
Page 5 of 46