Table of Contents
Advertisement
4
EVB-ANT-1
The EVB-ANT-1 application board offers developers a quick and easy way to evaluate the ANT-B10
and ANT-B11 antenna boards. It features the NXP i.MX RT1062 Microcontroller Unit (MCU) for
configuring and developing direction finding applications, as well as an Ethernet PHY chip and u-blox
MAYA-W1 Wi-Fi module.
Figure 12
shows the modules, jumpers, and connectors on the board that are referenced throughout
this document.
J7:
Custom antenna header
SW2:
Antenna board connector button (SWITCH1)
SW4:
Antenna board connector button (SWITCH2)
SW1:
Antenna board connector button (RESET)
J11:
Select NINA UART on-board EVB (remove)
J12:
Select NINA UART on ANT-B1 host (remove)
J6:
Barrel jack power connector (auxiliary jack,
DC 9-57V)
Figure 12: EVB-ANT-1 board showing mounted plexiglass base enclosure, modules, jumpers, and connectors
UBX-22006906 - R07
C1-Public
SW3:
Boot options (Internal boot/serial downloader)
SW5:
MCU (NXP i.MX RT1062) user button/reset
SW6:
System reset
SW7:
MCU (NXP i.MX RT1062) MCU reset
J13:
USB type C
J15:
USB type C
T1:
RJ45 Ethernet connector (PoE)
EVB-ANT-1
XPLR-AOA-3 - User guide
Page 14 of 46
Advertisement
Table of Contents
