Evk-Jody-W374 Antenna Connections; Evk-Jody-W377 Antenna Connections - u-blox EVK-JODY-W3 User Manual

☞
Connect the external antennas supplied with EVK-JODY-W377 to the selected SMA
connectors. For further information about the included external antennas, see also
includes.

3.9.1 EVK-JODY-W374 antenna connections

On EVK-JODY-W374 the U.FL connectors on the module board (ANT0 and ANT1) are connected
through coaxial cables to the two internal antennas on the carrier board (ANT400 and ANT401).
ANT2 ANT0
ANT400
SMA2 SMA0
Figure 17: Default antenna configuration for EVK-JODY-W374

3.9.2 EVK-JODY-W377 antenna connections

On EVK-JODY-W377 one U.FL connector (ANT2) on the module board is connected through a single
coaxial cable to the internal antenna (ANT400) on the carrier board. ANT0 and ANT1 on the module
board are connected to two SMA connectors (SMA1 and SMA2) on the carrier board for use with
external antennas.
ANT2 ANT0
ANT400
SMA2 SMA0
Figure 18: Default antenna configuration for EVK-JODY-W377
UBX-20030840 - R04
ANT1
ANT401
SMA1
ANT1
ANT401
SMA1
Board description
EVK-JODY-W3 - User guide
Kit
Page 23 of 29