ICON WESLO MOMENTUM G 3.2 User Manual page 8

3. While a second person lifts the front of the
Frame (1), attach the Front Stabilizer (10) to
the Frame with two M8 x 65mm Carriage Bolts
(51), two M8 Curved Washers (101), two M8
Split Washers (63), and two M8 Acorn Nuts (58);
insert both Carriage Bolts, and then tighten
the Acorn Nuts.
4. While a second person holds the Upright (2)
near the Frame (1), connect the Upright Wire
(31) to the Reed Switch Wire (47).
Next, connect the Resistance Cable (25) to the
Lower Cable (42) in the following way:
See inset drawing A. Pull upward on the metal
bracket on the Lower Cable (42), and insert the
tip of the Resistance Cable (25) into the wire clip
inside the metal bracket.
See inset drawing B. Firmly pull the Resistance
Cable (25) and slide it into the metal bracket on
the Lower Cable (42).
See inset drawing C. Using pliers, squeeze
together the prongs on the upper end of the
metal bracket.
3
58
63
101
58
4
2
31
25
47
42
1
8
1
10
63
101
A
25
B
25
C
51
42
42