ICON WESLO MOMENTUM G 3.2 User Manual page 10

6. Have a second person hold the Handlebar (52)
near the Upright (2).
See the inset drawing. Insert the Pulse Wires
(A) through the Grommet (99), into the left side
of the Upright (2), and out of the top of the
Upright. Then, press the Grommet into the left
side of the Upright.
Tip: Avoid pinching the Pulse Wires (A).
Attach the Handlebar (52) to the Upright (2)
with two M8 x 35mm Screws (86), two M8 Split
Washers (63), and two M8 Washers (55); start
both Screws, and then tighten them.
Then, press the Handlebar Cover (88) onto the
Handlebar (52).
7. Identify the Right Upper Body Arm (6) and orient
it as shown.
Next, orient an Upper Body Leg (64) so that the
hexagonal holes (B) are on the side shown.
Insert the Right Upper Body Arm (6) into the
Upper Body Leg (64). Attach the Right Upper
Body Arm with two M8 x 40mm Bolts (56), two
M8 Washers (55), two M8 Split Washers (63),
and two M8 Acorn Nuts (58). Make sure that the
heads of the Bolts are inside the hexagonal
holes (B). Start both Bolts, and then tighten
them.
Attach the Left Upper Body Arm (5) to the
other Upper Body Leg (64) in the same way.
6
63 55
86
88
99
A
2
7
5
64
56
10
A
52
2
Avoid
pinching
the Pulse
Wires (A)
6
58
63
55
B
64