Table of Contents
Advertisement
17. Insert the Seat Post (24) into the Frame (1).
Adjust the Seat Post (24) to the desired height,
and insert the Seat Post Knob (87) into the indi-
cated hole (E) in the Frame (1) and into one of
the adjustment holes (F) in the Seat Post.
Tighten the Seat Post Knob (87). Make sure
that the Seat Post Knob is inserted into
one of the adjustment holes (F) in the Seat
Post (24).
18. Attach the Water Bottle Holder (81) to the
Upright (2) with two M4 x 12mm Screws (66).
19. Make sure that all parts of the hybrid trainer are properly tightened. Extra parts may be included. To
protect the floor or carpet from damage, place a mat under the hybrid trainer.
17
24
E
1
18
66
15
F
87
81
2
Advertisement
Table of Contents
