Verathon GlideScope Go 2 Operation & Maintenance Manual page 9

WARNING
Ensure that you follow the manufacturer's instructions for handling and disposing of cleaning,
disinfection, or sterilization solutions.
WARNING
Do not reuse, reprocess, or resterilize single-use components. Reuse, reprocessing, or
resterilization may create a risk of contamination of the device.
Warnings: Product Safety
WARNING
Electric shock hazard. Do not attempt to open the system components. This may cause serious
injury to the operator or damage to the instrument and voids the warranty. Contact Verathon
Customer Care for all servicing needs.
WARNING
Use of accessories and cables other than those specified or provided by Verathon may cause
this system to experience electromagnetic malfunctions, including increased emissions or
decreased immunity. This may cause improper operation, procedure delays, or both.
WARNING
To reduce the risk of electrical shock, use only the accessories and peripherals recommended
by Verathon. Use of accessories and cables other than those specified or provided by Verathon
may result in increased electromagnetic emissions or decreased electromagnetic immunity of
this equipment and may result in improper operation.
WARNING
The charging cradle should be used only for charging the GlideScope Go 2 monitor. Any use of
the charging cradle other than charging the GlideScope Go 2 monitor can cause malfunctions
or equipment damage.
WARNING
Verathon has conducted no analysis to establish the compatibility of the system with
environments where magnetic resonance imaging (MRI) equipment is installed. Because of
this, the owner of the system must exclude it from any magnetic resonance (MR) environment.
Operations & Maintenance Manual: Important Information
3
0900-5165 REV-00