Verathon GlideScope Go 2 Operation & Maintenance Manual page 19

2. Allow the battery to charge until the indicator LED is solid green. See the following table for a summary
of how the indicator LED indicates the charge level and condition of the battery.
Table 5. Indicator LED Battery Charge Descriptions
LED STATUS
Solid green
Solid orange
Solid red
Blinking red
Off
3. The monitor is not operational while charging. If the monitor is connected to power while turned on, a
notice displays on the screen, and then the monitor automatically shuts down after 5 seconds.
4. Remove the monitor from the cradle, and then press the Power button to turn the monitor on.
Note: Do not attach a blade or baton at this time.
Operations & Maintenance Manual: Setting Up
CONNECTED TO EXTERNAL POWER
System On System Off
Nearly full
Partially charged
Nearly empty
Over temperature or not present
NOT CONNECTED TO EXTERNAL POWER
System On
—
—
Not charging
System Off
—
—
—
13
0900-5165 REV-00