Verathon GlideScope Go 2 Operation & Maintenance Manual page 23

9. Tap the toggle to set the Automatic Shutdown preference. Tap Shutdown Timer to select the timer
duration. Tap the Forward
Note: Automatic Shutdown is only active when the monitor does not have a blade attached.
10. Tap the toggles to set the Snapshot and Video preferences. When these toggles are on, the Snapshot
or Video buttons are displayed on the main window. Each setting has the option to display its button for
5 seconds when the screen is tapped or when the monitor is turned on, or to display it continuously. Tap
the Forward
11. Tap Finish to save all settings and close the Setup Wizard or tap Cancel to discard all changes and
return to the main screen.
Operations & Maintenance Manual: Setting Up
button to continue.
button to continue.
17
0900-5165 REV-00