Table of Contents
Advertisement
REGIONAL
Use the Regional Settings menu to choose the system language, date, and time.
•
To configure Regional settings, from the Home screen, tap the More
button, and then tap Regional.
Table 8.
Regional Settings Menu
REGIONAL MENU TREE
Language
Date
Time
ADMINISTRATION
Use the Administration Settings menu to set the device name, set a security code, reset the system settings,
import settings from another monitor with a USB drive, or export the monitor settings to a USB drive.
To configure Administration settings, from the Home screen, tap the More
•
button, and then tap Administration.
Table 9.
Administration Settings Menu
ADMINISTRATION MENU TREE
Device Name
Security Code
Reset Settings
Import / Export
Settings
Operations & Maintenance Manual: Setting Up
Select the system language. In the confirmation box, tap Yes
Language
to save, or Cancel to discard the change.
Date
Today's date.
Select the date format:
• YYYY-MM-DD
Date Format
• DD-MM-YYYY
• MM-DD-YYYY
Time
Today's time.
Select the time format:
Time Format
• 12-Hour (AM / PM)
• 24-Hour
Time Zone
Select the time zone.
Daylight Saving
Toggle—Enables Daylight Saving Time.
Time
Device Name
Enter a device name, and then tap the Confirm
Enter a 4-digit security code, enter it again to confirm, and
Security Code
then tap the Confirm
Tap Reset, and then tap Yes to confirm you would like to
restore all device settings to the factory settings.
Reset Settings
Note: This does not affect media saved on the device.
Connect a USB drive to the monitor that contains settings
exported previously from another monitor, tap Import, and
Import Settings
then tap Import. The monitor's settings are updated to match
the settings from the USB drive.
Connect a blank USB drive to the monitor, tap Export, and
then tap Export. The monitor's settings are saved to the USB
Export Settings
drive.
button, tap the Settings
SETTING
button, tap the Settings
SETTING
button.
0900-5165 REV-00
button.
21
Advertisement
Table of Contents
