Safety Measures - Xblitz S10 DUO User Manual

09. SAFETY MEASURES

1. Do not disassemble or interfere with the camera yourself. In the event
of a technical fault, please contact the service.
2. Use only the original accessories.
3. Use only the original power supply included with the device.
4. The device cannot be used in violation of the laws of your country or region.
5. The operating temperature range of the device is 0 - 35 °C. Storage: +5 to +45°C.
Humidity: 5-90% without condensation.
6. Do not expose the device to damage or physical impact.
7. Keep the product clean, the lens in particular. Do not use detergents or chemicals
for cleaning.
8. Clean the device only when it is disconnected from the power supply.
9. Keep the device out of reach of children.
10. Do not expose the device to very high temperatures or fire.
11. If you notice the smell of burnt plastic or electronics from the camera, unplug
the device as soon as possible and contact the service department.
EN
1O. FAQ
1. The device does not turn on/ o automatically.
The reason for this may be a constant power supply in the car cigarette lighter
socket.
2. The device restarts while driving.
It is recommended to check the power source.
3. The device does not record in a loop (records randomly).
Check the setting of the "motion detection" function – it should be disabled while
driving.
4. The device shows the message "full card".
Check the "G-sensor" and "parking mode" functions and set them to a minimum.
Format the card in FAT32 format first on your computer and then in the DVR.
5. The device records noise and distorted, blurred sound.
The device has a highly sensitive microphone that records all ambient noises.
Recorded sounds may overlap. The air supply of the windshield may also distort
the sound.
6. The device does not respond.
Briefly press the RESET button or restore the device to factory settings.
7. There are stripes on the recording.
Incorrect setting of the refresh rate of the image. Set the frequency value to "50Hz"
or "60Hz" depending on local settings.
Due to the continuous improvement of products, the manufacturer reserves the
right to change the device and its kit without prior notice, some of the functions
described in this manual may di er slightly in reality.
23