Safety Measures - Xblitz Z9 User Manual

06. FAQ
1. The device does not turn on / o automatically.
This action may be caused by the constant power supply in the car
cigarette lighter socket.
2. The device restarts itself during driving.
It is recommended to check the power supply source.
3. The device does not record in the loop.
Check the motion detection function – it should be turned o during
driving.
4. The device shows "memory card full" alert.
Check the g-sensor and parking mode functions and set them on the
possible minimum level. The memory card should be formatted into
the FAT32 file system first in the PC, and then in the recorder.
5. The device records noise and overlapped sound:
The device has a very sensitive microphone, which records all the
surrounding sounds. The recorded sounds may overlap and cause
distortions. Also the air flow from the front mirror may distort the sound.

07. SAFETY MEASURES

1. Do not disassembly or interfere with the camera. If the device is faulty,
contact the service point.
2. Only use the original accessories.
3. Use only the original charger, included in the set. Using a di erent power
supply can a ect the battery negatively.
4. Do not use the device for purposes that are against the law of the country
or region you are in.
5. The operating temperature of the device is 0 - 35°C. Storage temperature
is 5°C to 45°. Operating air humidity is 5-90% without condensation.
6. Avoid damaging the device with physical force.
7. Clean the device, especially the lens. Do not use detergents or other chemicals
when cleaning the device.
8. Clean the device only when it's disconnected from the power supply.
9. Keep the device away from children.
10. Do not expose the device to very high temperatures and fire.
29