Setting Functions; Safety Precautions - Xblitz Z10 SLIM User Manual

06. SETTING FUNCTIONS:

Leave the device on, connect the application to the cell phone, enter the home
screen and click the Settings interface in the upper right corner.
1. Recording: if you want to record, you can open it.
2. Preview and delete: keep the connection between your device and cell phone.
If you want to view previously recorded videos, you can click "previous video" in
the mobile app. If you want to view photos taken earlier, you can click "previous
photo" in the mobile app.
3. Camera time watermark: if a watermark is required, you can set it.
4. Format: Select to format the SD card.
5. Cycle recording time: 1min / 3min / 5min / off.
6. Version: Check the software version.

07. SAFETY PRECAUTIONS

1. Do not disassemble or tamper with the camera yourself. Contact service if a
malfunction occurs.
2. Use only original accessories.
3. Use only the original charger supplied. Use of another power adapter may
adversely affect the performance of the device or battery.
4. Do not use this device for any purpose that is unlawful in your country or region.
5. The device is designed for use at temperatures between 0 and 35 °C (59 °F and
77°F) and can be stored at temperatures between 5 and 45 °C (59 °F and 77 °F).
6. Do not expose the unit to damage or shock.
7. Keep the product, especially the lens, clean. Do not use detergents or chemicals
when cleaning.
8. Clean the device when unplugged.
9. Keep out of the reach of children.
10. Do not expose this unit to extreme heat or fire.
11. If you smell burning plastic or electronics coming from the camera, unplug the
device from the power outlet as soon as possible and contact customer service.
08. FAQ
1. The device does not turn on/off.
This could be due to a permanent power source in the cigarette lighter socket.
2. The device restarts while driving.
It is recommended to check the power source.
3. The device does not record in a loop (it records randomly).
Check "motion detection" setting – it should be turned off.
4. The device shows "card full" message.
Check "G-sensor" function and set it to a minimum. The card must be formatted
in FAT32 format first in the computer, then in the recorder.
11