Supermicro SuperServer SYS-511R-M User Manual page 104

Appendix B: System Specifications
Appendix B
System Specifications
Processors
Single Intel® Xeon® E-2400 or 12th Generation Pentium® (Socket V0 - LGA 1700) series processor with up to eight cores
Note: Refer to the motherboard specifications pages on our website for updates to supported processors.
Chipset
Intel C266
®
BIOS
AMI 32 MB SPI Flash EEPROM
Memory
Up to 128 GB of DDR5 ECC UDIMM memory with speeds of up to 4400 MT/s in four memory slots
Storage Drives
Four hot-swap 3.5" SATA drive bays (optional SAS3 via add-on card)
Two M.2 PCIe 4.0 x4 M-Key NVMe
PCI Expansion Slots
One PCIe 4.0 x4 (in x8) dedicated internal HBA slot
For slots 1 and 2:
One PCIe 5.0 x16 (FHHL) in slot 1 -or-
One PCIe 5.0 x8 (FHHL) in slot 1 and one PCIe 5.0 x8 (LP) in slot 2
Networking
Two Intel i210 1GbE LAN ports
One dedicated LAN port for BMC
Input/Output
Five USB 3.2 Gen 1 ports (two rear, two via one header, one via one Type A header)
Six USB 2.0 ports (two rear, four via two headers)
One VGA port (one rear)
Two serial ports (one rear, one via one header)
Motherboard
X13SCH-SYS (WxL) 9.6 x 9.6 in (243.8 x 243.8 mm)
Chassis
CSE-813MF2TS-R0RCNBP 1U rackmount (WxHxD) 17.2 x 1.75 x 19.98 in (437 x 44.45 x 507 mm)
System Cooling
Four 4-cm mid-chassis fans, one CPU heat sink, and one air shroud
Power Supply
PWS-602A-1R 600 W high-efficiency power supplies (Titanium level, 96%) with redundant option
Operating Environment
Operating Temperature: 10º to 35º C (50º to 95º F)
Non-operating Temperature: -30º to 60º C (-22º to 140º F)
Operating Relative Humidity: 8% to 80% (non-condensing)
Non-operating Relative Humidity: 8% to 90% (non-condensing)
104