Raider RD-AG70 User Manual page 18

18 www.raider.bg
of the rotation of the disc. Never attempt to remove the turntable from the cutting channel, otherwise
the recoil may occur. Identify and remove the cause of the wedge.
9.4. Do not switch the angle grinder again if the disc is cut in detail. Be carefully before you continue
cutting, cutting disc to wait up to full speed. Otherwise, the disc cans block to rebound from the work
piece or cause recoil.
9.5. Provide a stable attachment of large parts in an appropriate way to limit the risk of recoil jammed
as a result of cutting disc. During cutting large parts can be bent into action under its own weight.
9.6. Be especially cautious in cutting channels in walls or other areas that can conceal surprises.
Cutting disc can cause the machine to kick to touch or gas pipelines, power lines or other objects.
10. Specific instructions for safe operation in grinding with sandpaper.
10.1. Do not use too large sheets of sandpaper, follow the manufacturer's instructions for the size of
sandpaper.
10.2. Sandpaper sheets to be made outside the receiving disk can cause injury and lead to blockage
and rupture of sandpaper or the occurrence of recoil.
11. Specific instructions for the safe operation of cleaning with wire brushes.
11.1. Do not forget that in the normal operation of the wire brush fall staples. Do not overload the wire
brush by squeezing it too hard. Scatter wire brush from staples can easily penetrate clothing and / or
skin.
11.2. Prior to make sure that the wire brush is not touching the guard. Cupped disc and wire brushes
can increase its diameter due to the power of jamming and centrifugal forces.
12. Additional instructions for safe operation.
Work with goggles.
12.1. Use appropriate instruments to find any hidden beneath the surface pipelines, or contact the
appropriate local supply company. Into contact with the wires under tension can cause fire or electric
shock. Pipeline damage can lead to explosion. Deterioration of water has the effect of major material
damage and may cause electric shock.
12.2. If the supply voltage is interrupted (for example due to blackouts, or if the plug is removed
from contact) unblock the trigger switch and plug it into position - off ". This will prevent uncontrolled
inclusion of angle grinders.
12.3. In the processing of stone materials, work with external dust-extraction system. Using suction of
the powder system limits damage to your health caused by dust.
12.4. During operation keep grinding hard with both hands and lend a stable position of the body. With
both hands, grinding water safer.
12.5. Provide work piece. Detail, and attach with appropriate appliances or braces is anchored more
firmly and securely than if you hold it by hand.
12.6. Keep your workplace clean. Mixtures of different materials are particularly hazardous. Fine
shavings from light metals can be ignite or explode.
12.7. Do not use the angle grinder when the power cord is damaged. If during operation the cable is
damaged, do not touch. Immediately disconnect the plug from the outlet.
Damaged power cables increase the risk of electric shock.
Failure of the considered instructions may lead to electric shock, fire and / or severe injuries.
13. Functional description and purpose of the grinding machine.
Is a manual power grinder with insulation class II. He is powered with the help of a collector single-