Installation; Removal Of The Locking Screws From The Shutter; Fixing To The Boiler; Lifting Points - Riello DB 6 LM C10 TC FS1 A0 T150 Installation, Use And Maintenance Instruction

3

Installation

3.1 Removal of the locking screws from the
the shutter
All the installation, maintenance and disassembly
operations must be carried out with the electricity
supply disconnected.
DANGER
The installation of the burner must be carried out by
qualified personnel, as indicated in this manual and in
compliance with the standards and regulations of the
WARNING
laws in force.
Remove the screws and the nuts 1) and 2) (Fig. 7),
before installing the burner on the boiler. Replace them
with the screws 3) M12 X 16 supplied with the burner.
WARNING
3.2

Fixing to the boiler

Refractory R E FR ATTAR IO
MAX 500
Fig. 8
3.3

Lifting points

To move the burner, the attachment points indicated in Fig. 9 should be used.
8
The figure alongside shows how to fix the burner to a boiler without a
cooled frontal. The head should not jut out more than 200 mm.
In any case, the fettled wall should not extend beyond the end of the
burner combustion head.
D8401
1
2
2
1
20082850
3
D12015
3
Fig. 7
Fig. 9