Table of Contents
Advertisement
CAUTION
Check the operational state before use.
• Begin use after ensuring that there are no problems with the displayed image.
• When using multiple units, begin use after ensuring that the images are displayed appropriately.
Securely fix cables / cords that have a fixing feature.
If they are not fixed securely, cables / cords may disconnect, and subsequently images may be cut off and
your operations may be disrupted.
Handle with care when carrying the unit.
Disconnect the power cord and cables when moving the unit. Moving the unit with the power cord or cables
attached is dangerous and may result in injury.
Carry or place the unit according to the correct specified methods.
• Monitors of size 30 inches and above are heavy. When unpacking and/or carrying the monitor, ensure at least two
people are involved.
Dropping the unit may result in injury or equipment damage.
Do not block the ventilation slots on the cabinet.
• Do not place any objects on the ventilation slots.
• Do not install the unit in a place with poor ventilation or inadequate space.
• Do not use the unit laid down or upside down.
Blocking the ventilation slots prevents proper airflow and may result in fire, electric
shock, or equipment damage.
Do not touch the plug with wet hands.
Doing so may result in electrical shock.
Use an easily accessible power outlet.
This is to facilitate disconnecting the power in case of a problem.
Isolating the device from mains supply
Means of isolating the device from mains supply is by disconnecting the AC power line. Make sure that the
AC power line easily accessible.
Do not subject the LCD panel to strong impact.
Otherwise, glass will break and may result in injury.
Periodically clean the area around the power plug.
Dust, water, or oil on the plug may result in fire.
Unplug the unit before cleaning it.
Cleaning the unit while it is plugged into a power outlet may result in electric shock.
If you plan to leave the unit unused for an extended period of time, disconnect the power plug from
the wall socket after turning off the power switch for safety and power conservation.
For users in the territory of the EEA and Switzerland:
Any serious incident that has occurred in relation to the device should be reported to the
Manufacturer and the Competent Authority of the Member State in which the user and/or patient is
established.
7
Advertisement
Table of Contents
