Table of Contents
Advertisement
TROUBLESHOOTING
THE MACHINE IS NOT DISPENSING
1
Running out of water during
use can feed air into the
pipework. This can stop
extraction or cause an
inconsistent flowrate. If this
problem occurs, carry out
steps 2a and 2b to resolve.
2a
Purge: Clean the Filter Plate
(see page 15) and fill the
Water Tank with water.
Close the Lever and press
the Lungo Button. If the
machine does not dispense,
repeat until the water is
dispensing out of the Nozzle
with consistent flow. If this
fails please follow step 2b.
16
2b
Prime: Half fill the Water
Tank with water. Ensure no
capsule is in the machine
and press the Lungo Button.
Remove and replace the
Water Tank 5 times while
machine is running; this
will allow the trapped air
to escape through the
valve of the Water Tank. If,
after following these steps
the machine is still not
dispensing, contact Dualit
Customer Services for help
.
+
Advertisement
Table of Contents
