Descale - Dualit Pod Machine Instruction Manual & Guarantee

DESCALE

HARD WATER WILL CAUSE LIMESCALE BUILD-UP, RESULTING
IN BLOCKAGES THAT CAUSE PERMANENT DAMAGE. PRODUCT
FAILURE DUE TO THE BUILD-UP OF LIMESCALE IS NOT COVERED
BY GUARANTEE.
Dualit recommends cleaning and descaling regularly, in a well-ventilated area and using a Water
Softener to prevent limescale build-up in the machine. For further guidance, including the
frequency with which you should descale, see page 13. Please note: Always clean your machine
first before beginning the descaling process. See page 15 for instructions. The descale process
takes approximately 30 minutes.
Caution: Avoid contact with descaling solution. Steam released during descale
process may be harmful. Risk of scalding and injury.
1
SHOP DESCALER
Ensure your descaling
product is suitable for coffee
machines; scan the QR
code to purchase Dualit's
recommended descaler.
Follow the descaling product
instructions carefully. If you
are using a water softener,
ensure water softener is
removed before adding
descaler. Risk of chemical
inhalation.
2
The Espresso and Lungo
Buttons will flash three times
per second immediately
after switching on, to indicate
descaling is required. This
automatically occurs every
500 dispenses.
Note: Descale can be
completed at any time with
or without the automatic
descale indicator.
13
3
Ensure no capsule is in the
machine. Lift and close
Lever twice to empty any
remaining water from the
Brewhead Chamber. Make
up the correct ratio of
water to descaling solution
according to the product
instructions. Unplug the
machine, remove the
Water Tank and fill with the
descaling solution to Max
Mark.