Maintenance Program - Promeba PB-420 Series User Manual

USER GUIDE
RAIL SERIE PB-420
07
GENERAL MAINTENANCE
07.4.

Maintenance program

Although the frequency of the controls is determined by factors such as legal requirements,
the type of use, the frequency of use, the environmental conditions during use and storage,
it is placed a recommendation on the maintenance that the equipment must have for correct
operation throughout its useful life.
All maintenance and revision activities must be recorded and documented with the
corresponding technical intervention reports, and the documentation must be kept for at least
10 years from the end of the product's useful life and must be made available to the
competent Authorities and/or from the Manufacturer, when requested.
Maintenance review
Disinfect
Clean
Inspect
Grease the ramp and the lateral
displacement
Change the scoop stretcher clips
Check the tension of the lateral
displacement cables
For both the disinfection and cleaning procedures, point 7.1 of this manual must be followed.
During the inspection procedure, which must be done after each use, the following tasks must
be carried out:
- Check that all components are present.
- Check the integrity of the device, that is, that there are no breaks, cracks, holes or
cuts.
- Check the wear of the product following section 7.3 of this user guide.
- Check that the moving parts slide correctly.
- Check that the accessories provided are present, intact and that they function
correctly.
EN
REV. 2023/05
When
Every use
necessary
X
X
X X
X
Every
Every
month
year
X X
X X
X X
X
X
68