Promeba PB-420 Series User Manual page 49

USER GUIDE
RAIL SERIE PB-420
04 WARNINGS
14. Use only original or PROMEBA approved components/spare parts and/or
accessories to carry out all operations without causing alterations or modifications to
the device; Otherwise, any responsibility for the operation is declined.
15. Ensure that all the necessary precautions are taken in order to avoid the hazards
that can arise as the result of contact with blood or body fluids.
16. Register and store with these instructions: lot number, place and date of purchase,
first date of use, date of checks, name of users and any other comments.
17. When the device is being used, the assistance of qualified staff must be
guaranteed.
18. The product must not be exposed or come into contact with thermal sources of
combustion and flammable agents, but must be stored in a dry, cool place, protected
from light and sunlight.
19. Store and transport device in its original packaging.
20. Do not store the product under other more or less heavy materials, which can
damage the structure of the product.
21. Attention: laboratory testing, post production tests and instruction manuals cannot
always consider every possible scenario for use. This means that in some cases the
performance of the product could be notable different from results to date obtained.
Instructions are continually being updated and are under tight surveillance of fully
qualified staffs with adequate technical formation.
22. As a distributor or end users of products manufactured and/or marketed by
Promeba, S.L., you are strictly required to have a basic knowledge of any legal
requirements existing in the goods final destination country applying to the devices
contained in this supply (including laws and norms regarding technical specifications
and/or safety requirements) and therefore you are also strictly required to have the
necessary knowledge to guarantee all aspects regarding the total conformity of the
products to the regulations in the relevant territory.
23. Promptly notify PROMEBA regarding any revisions to be made by manufacturer
in order to guarantee the conformity of the product to the territory's legal specifications
(including those resulting from rules and/or norms of other nature).
24. Act with all due care and diligence, and contribute to ensure conformity to general
safety requirements of all devices marketed in the territory, by providing final users
with all necessary information for carrying out periodical checks on their devices, as
specified in the relevant user manual.
25. Actively contribute to product safety checks on products sold, by communicating
any relevant risk analysis information both to the manufacturer and to any competent
authorities so that the necessary actions can be promptly taken.
26. Be aware that in the event of any failure to conform to the above mentioned
requirements you will be deemed fully responsible for all damages that might occur.
Therefore we expressly disclaim any responsibility and/or liability for your non-
compliance with the present "Regulatory provisions".
27. Follow internal procedures and protocols approved by your organization.
EN
REV. 2023/05
49