General Maintenance - Promeba STRETCHER Series User Manual

USER GUIDE // STRETCHER SERIES PC900
First edition: 2021/05
04

GENERAL MAINTENANCE

CLEANING
It is essential to keep the equipment clean to ensure a pro-
per use and durability of the set. A thorough clean must be
done periodically, especially in areas exposed to dirt that
may be damaged such as gears or mobile elements.
Do not use high-pressure cleaning systems, neither bleach
to disinfect the product, they can damage it. Instead, use
a hydroalcoholic based disinfectant, wash with water and
let it dry naturally, do not use sources of direct heat to dry.
MAKE SURE TO KEEP AREAS FROM FIGURE 9 FREE OF WA-
TER AND HUMIDITY. TAKE SPECIAL CARE NOT TO GET THEM
WET WHILE WASHING THE SET.
MOBILE ELEMENTS
Due to the intense and continuous use of mobile elements such as levers or commands, periodically exa-
mine its proper operating.
Inspect the mechanical connections that may exist.
LUBRICATE
Generally, all moving parts must be lubricated. Our products leave the factory completely lubricated. Howe-
ver, it is possible that the elements lose lubrication with the passage of time and the use of the product,
either due to loss of lubricant or dirt.
Periodically clean and lubricate affected areas according to manufacturer's specifications.
Check for loose, missing or worn parts. Periodically inspect all moving parts to ensure components are tight.
WEAR AREAS
Inspecting regularly on the system components for signs of wear is a preventive measure that can reduce
breakdowns. Check possible lubricant leakages, grooves or bearing in poor condition.
MECHANICAL FIXING
We call mechanical fixing elements to the components used to fix the product as a whole, mainly screws
and derivatives.
To some terms of use, due to vibrations or impacts, certain elements may lose their tightening torque or
fixing properties. Periodically review that there are no loose elements, especially on moving parts. Please
note and always respect the recommended tightening torques.
REPLACEMENT OF COMPONENTS
In the event that certain mechanical parts need to be replaced by qualified service personnel, they should
contact our sales department for more information on ordering spare parts and their installation.
MAINTENANCE SUMMARY
DISINFECT
CLEAN
INSPECT
LUBRICATE
SPRINGS REPLACEMENT
WHEELS REPLACEMENT
EVERY USE WHEN NEEDED
X
X
X
X
FIGURE 9
EVERY MONTH EVERY YEAR
X
X
X
EVERY 4 YEARS
X
19