General Warnings - Promeba PB-420 Series User Manual

Hide thumbs Also See for PB-420 Series:
Table of Contents

Advertisement

Available languages

Available languages

USER GUIDE
RAIL SERIE PB-420
04 WARNINGS
04.1.

General warnings

1. The product must be used by trained personnel only, having attended specific
training for this device and not for similar products.
2. Establish a maintenance and periodic control program and identify a reference
manager. The person in charge of the ordinary maintenance of the device must
guarantee the basic requirements provided by the manufacturer in these instructions
for use. It is recommended that the subject check at least every 6 months if there are
updated user manuals available or if there are any changes related to his / her
product. This information is freely available on the website http://promeba.com/.
3. Training routines must be registered on a special register in which the names of
those trained, of the trainers, date and place are indicated. This register, which will
certify the eligibility of the operators to use the Promeba, S.L. device, has to be kept
for a period of 10 years after the disposal of the device itself. This register will be
made available to the competent authorities and/or manufacturer if requested.
4. Promeba, S.L. is always at your disposal to plan trainings on products.
5. Before carrying out any kind of operation on the appliance (training, installation,
use), the operator must carefully read the enclosed instructions, paying particular
attention to the correct safety precautions and to the procedures to be followed for
installation and for correct use.
6. If the instructions belong to another device and not the device received, inform the
manufacturer immediately and avoid use of the device.
7. In the case of any doubts as to the correct interpretation of the instructions, please
contact Promeba, S.L. for any necessary clarifications.
8. Do not allow untrained persons to help during the use of the device, because they
could cause damage to the patient or to themselves.
9. Before each use of device the perfect operating state of the device must be checked
as specified in the instruction manual. If any damage or abnormalities which could in
any way influence the correct functioning and the safety of the device, of the patient
and/or of the user are detected, the device must be immediately removed from service
and the manufacturer must be contacted.
10. If any failure or incorrect functioning of the device is detected, it must be
immediately substituted with a similar item so that the rescue procedures are
guaranteed without any interruption.
11. Use of the device in anyway other than described in this manual is forbidden.
12. Do not alter or modify in any way the device; any such interference could cause
malfunctions and injury to the patient and/or rescuer.
13. The device must not in any way be tampered with (modification, adjustment,
addition, replacement). In such cases all responsibility will be denied for any
malfunctions or injuries caused by the device itself; moreover CE certification and
product warranty will be considered void.
EN
REV. 2023/05
48

Advertisement

Table of Contents
loading

Table of Contents