Jumper And Connectors - Advantech Valor ANA-D8060 Series Startup Manual

1.4 Jumpers and Connectors
Connectors on the AIMB-587 motherboard link it to devices such as hard disk drives and a
keyboard. In addition, the board has a number of jumpers used to configure your system for your
application.
The tables below list the function of each of the board jumpers and connectors. Later sections
in this chapter give instructions on setting jumpers. Chapter 2 gives instructions for connecting
external devices to your motherboard.
Table 1.1: Jumpers
Label
JFP1
JFP2
JSETCOM2
JCMOS1
JCASEOP_SW1
JOBS1+JWDT1
PSON1
JME1
JUSBPWR1
JUSBPWR2
Table 1.2: Connectors
Label
DP1
LAN1_USB12
LAN2_USB34
LAN3
VGA1
EDP1
AUDIO1
INV1
FPAUDIO1
SPDIF1
LANLED1
Advantech Valor Startup Manual
Function
Power Switch/ Reset/ External Speaker/ SATA HDD LED/MBus
connector
Power LED/ Keyboard Lock
Serial port: RS232/RS422/RS485 jumper setting
CMOS clear (default 1-2 pin)
Case open selection pin header JEDP1
EDP Panel Voltage Selection
Watchdog timer output and OBS beep
AT / ATX Mode selection JSETCOM3_V1
COM3 RI# selection pin header
Intel ME header
USB Power selection for USB910, USB1112, USB1314, USB1516
USB Power selection for LAN1_USB12, LAN2_USB34, USB56,
USB78
Function
Display Port 1, 2 port connector
LAN1 & USB12 Connector
LAN2 & USB34 Connector
LAN 3, 4 (10GbE)
VGA port connector
eDP port connector
Line Out, Mic IN connector
EDP Backlight Inverter Power Connector
Front Panel audio connector (FP_AU-DIO)
Digital Audio connector 4 x 1 header pitch = 2.54 mm
Front Panel LAN Indicator connector
20