Specifications - Projecta IS1400 Manual

UNDER AND OVER-VOLTAGE PROTECTION
• The IS1400 jump starter will deactivate and sound an alarm if connected to a
vehicle battery which is higher than 14.6V DC, or if the internal battery is discharged
to a level whereby the battery might be damaged.
SURGE PROTECTION
• The IS1400 features built in surge protection so you can safely jump starting of vehicles
with EFI (electronic fuel injection) and computer management systems.

SPECIFICATIONS

P/No.
Battery
Battery Capacity
Battery Chemistry
Peak Amps
Clamp Power
Nominal Voltage
Battery Cycles
Jump starter Leads
Length
Cable
Polarity Protection
Overload Protection
Recharging
USB Charging Port
USB 12/24V DC Socket
DC Charging
Jump start Connection Voltages
Vehicle Voltage Range
USB
USB Output
USB Low Voltage Disconnect
Cable
Dimensions, Weight & Environmental
Height
Length
Width
Weight
Operating Temperature
Operating Temperature (charging)
Storage Temperature (long term)
Ingress Protection
4.0Ah at 12.8V DC, 16,000mAh at 3.2V DC, 51.2Wh
Lithium Iron Phosphate (LiFePO
±400mm Positive & Negative
MCU controlled with mechanical relay
MCU controlled with mechanical relay
5V DC 3A max USB-C charging port, 3rd party 15W 240V AC
USB adaptors can be used (not provided)
5V DC 3A max output (provided)
May take up to 5 hours
2–14.6V DC
5V DC 3A max
Battery voltage at 12V DC
1m long USB-A to USB-C
162mm (with clamp attached)
-20˚C to 60˚C
-10˚C to 45˚C
IP65 (Rain Proof) with covers over the ports
IS1400
)
4
1400A
500A
12.8V DC
2000
AWG 4
69mm
225mm
1.7kg
0˚C to 45˚C
5