Override Mode; Flood Light - Projecta IS1400 Manual

OVERRIDE MODE

Under normal conditions, the IS1400 automatically detects the jump start voltage.
However, the user is required to manually select output voltage if the vehicle battery
voltage is between 0 to 1V DC.
Vehicle Battery Voltage between 0V to 1V DC
Step Detail
1
Press and hold the
2 "12V OVERRIDE MODE" has been entered and your vehicle is ready to be
jump started.
WARNING
• Do not allow positive (+)/red and negative (-)/black clamps to touch each other
whilst jump starter is in override mode.
• Pay careful attention when enabling manual override; reverse-connection and
short-circuit protections are disabled.

FLOOD LIGHT

IS1400 provides the user with ample light when checking the vehicle's various
compartments in low light conditions.
Step Detail
1
Press
Note:
• If the IS1400 flood light is in operation, the "LIGHT ON" icon will appear on the
display
• Flood light will turn off if the internal battery has low charge or after 4 hours if
user does not operate the unit.
8
button to enter override mode.
button
Display
Display