Table of Contents
Advertisement
emulates USB device(s). For more information, see the Integrated Dell Remote Access Controller User's Guide at Dell.com/
idracmanuals.
Replacing an optional SD vFlash media card
Steps
1. Locate the SD vFlash media slot on the system.
2. To remove the SD vFlash media card, push the card inward to release it, and pull the card from the card slot.
Figure 77. Removing the SD vFlash media card
a. SD vFlash media card
b. SD vFlash media card slot
3. To install an SD vFlash media card, with the label side facing up, insert the contact-pin end of the SD vFlash media card into the card
slot on the module.
NOTE:
The slot is keyed to ensure correct insertion of the card.
4. Press the card inward to lock it into the slot.
Figure 78. Installing the SD vFlash media card
a. SD vFlash media card
b. SD vFlash media card slot
Removing the vFlash media unit
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Keep the Phillips #1 screwdriver ready.
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that are shipped with your product.
Installing and removing system components
135
Advertisement
Table of Contents
Troubleshooting
