Dell DR4300 System Owner's Manual page 39

Option Description
System Specifies the contact information of the system manufacturer.
Manufacturer
Contact
Information
System CPLD Specifies the current version of the system complex programmable logic device (CPLD) firmware.
Version
UEFI Compliance Specifies the UEFI compliance level of the system firmware.
Version
Related tasks
Viewing System Information
Related reference
System Information
System Information details
Memory Settings
You can use the Memory Settings screen to view all the memory settings and enable or disable specific memory functions, such as
system memory testing and node interleaving.
Related tasks
Viewing Memory Settings
Related reference
Memory Settings details
System BIOS
Viewing Memory Settings
To view the Memory Settings screen, perform the following steps:
Steps
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
4. On the System BIOS screen, click Memory Settings.
Related reference
Memory Settings
Memory Settings details
Memory Settings details
About this task
The Memory Settings screen details are explained as follows:
Pre-operating system management applications 39