INSTALL BRACKETS
1
2
16
Centre and secure the upper and centre
chimney brackets using two
30mm self
tapping
screws per bracket.
If a cornice is present:
Move the upper chimney brackets lower
to avoid cornice clashing with chimney
screws.
Recirculation installation only:
Align recirculation adapter to the upper
bracket. Fit using
30mm Phillips
screws.
INSTALL DUCTING
RIGID DUCTING
1
2
Ensure the ducting is the correct length
and compatible to the rangehood.
Do not reduce the duct diameter as
this will increase noise and reduce
performance.
Install external venting as required:
Weather proofing requirements depend
on the cladding/roofing type.
Soffit external venting.
Install external venting as required:
Wall external venting.
Install external venting as required:
Roof external venting.