Download Print this page

Advertisement

Quick Links

Cleaning and maintenance

• Unplug or disconnect the appliance from the power supply before servicing or cleaning.
• When replacing the bulb, let the bulb cool, and assure that power to the rangehood has been
• Never use abrasive or oil based cleaners
• Wear gloves to protect against sharp edges
Maintenance
The rangehood should be cleaned regularly using a mild, liquid detergent and a clean soft cloth to avoid a build-up of
grease occurring. Avoid the use of corrosive chemicals, abrasive cleaning products, hard brushes and steel wool pads.
Grease deposits are corrosive which can cause damage to your rangehood.
In areas of high humidity or coastal environments, cleaning should be carried out more
frequently.
Aluminium filters
• Depending on use, and at least once a month, the aluminium grease filters should be removed and cleaned with
hot soapy water or in a dishwasher.
• If washed in a dishwasher, the filters should be placed in an upright position to prevent food from falling on them.
• After rinsing and drying, replace the filters.
https://producthelp.fisherpaykel.com/au/Cook/Rangehoods/Canopy/HC60DCXB1/User_Guide_HC60DCXB1/05_Cleaning_an...
turned off. Use new bulbs according to that indicated on the rangehood nameplate.
Updated: Sun, 16 Feb 2020 00:02:13 GMT
Powered by
1

Advertisement

loading

Summary of Contents for Fisher & Paykel HC60DCXB1

  • Page 1: Cleaning And Maintenance

    • If washed in a dishwasher, the filters should be placed in an upright position to prevent food from falling on them. • After rinsing and drying, replace the filters. https://producthelp.fisherpaykel.com/au/Cook/Rangehoods/Canopy/HC60DCXB1/User_Guide_HC60DCXB1/05_Cleaning_an… Updated: Sun, 16 Feb 2020 00:02:13 GMT Powered by...
  • Page 2 Fully saturated carbon filters can become a barrier to air movement therefore limiting rangehood performance. In the event of fire, grease laden filters could be flammable and therefore regular replacement is recommended. https://producthelp.fisherpaykel.com/au/Cook/Rangehoods/Canopy/HC60DCXB1/User_Guide_HC60DCXB1/05_Cleaning_an… Updated: Sun, 16 Feb 2020 00:02:13 GMT Powered by...
  • Page 3: Replacing The Light Bulb

    1. Before changing the light bulb, ensure the rangehood is disconnected from the power supply. 2. Remove the aluminium grease filters. 3. Replace light bulbs. 4. Refit the aluminium filters. https://producthelp.fisherpaykel.com/au/Cook/Rangehoods/Canopy/HC60DCXB1/User_Guide_HC60DCXB1/05_Cleaning_an… Updated: Sun, 16 Feb 2020 00:02:13 GMT Powered by...